need a custom patch

[wargod]

i need a 11x11 patch made and cant find anyone who can make it, i drew the design but dont know how im supposed to show the person to make it anybody got any help for me

[LIER ONE]

If you send me your art, I can tell you what you need to tell the patch maker so there is no mistakes or questions. Look on Ebay for custom patch makers and send them your design and see how much it will cost. I have found this the easiest way. Plus most will do one offs instead of buying many.

[wargod]

If you send me your art, I can tell you what you need to tell the patch maker so there is no mistakes or questions. Look on Ebay for custom patch makers and send them your design and see how much it will cost. I have found this the easiest way. Plus most will do one offs instead of buying many.

mine is a circle patch im not sure if it will post it but here it is


the little lines and arrows are telling what colors i want that to be

1.red backround
2.black border around patch
3.black letters
4.white skull with black outline and black cracking designs that incrules the eye and around the teeth
5.the bullet holes on the top of the skull need to be black too

[4nik8]

i need a 11x11 patch made...

11x11 implies length by width, which further implies a square

I assume you mean that the diameter is 11

Remembering these formulae?

Circumference = Pi (3.14) times Diameter (C=pD)

Diameter = 2 times the Radius (D=2R)

Area = Pi times the radius squared (A=pr2)

Therefore, in the category of pertinent info for the patch maker:

If your patch has a diameter of 11", its circumference is approximately 34.6"

[wargod]

i need a 11x11 patch made...

11x11 implies length by width, which further implies a square

I assume you mean that the diameter is 11

Remembering these formulae?

Circumference = Pi (3.14) times Diameter (C=pD)

Diameter = 2 times the Radius (D=2R)

Area = Pi times the radius squared (A=pr2)

Therefore, in the category of pertinent info for the patch maker:

If your patch has a diameter of 11", its circumference is approximately 34.6"

no a circle can be 11 inches all around it

[4nik8]

no a circle can be 11 inches all around it

best of luck striking fear into the hearts of fellow Hoosiers with a 3 inch patch on the back of yer vest!

[chrismasonic]

i could probably make it for you...but it would be hand painted onto some kinda cotton or felt...you'd need to send me a scan

[chrismasonic]

your skull now exists...

[4nik8]

your skull now exists...

and if those words aren't comforting, i don't know what is!!

[chrismasonic]

it's slightly different cos it's handpainted onto some felt...

[wargod]

it's slightly different cos it's handpainted onto some felt...

AWESOME THANKS MAN!!!! just message me when you got it done and ill give you my address, i feel like i did when i was 13 and waited for christmas lol....sadly i spilt a cup of beer on my scanner and broke it

[chrismasonic]

sorry,
i havn't got the time to do the whole thing,
work has gotton a stranglehold on me,
you'll have to sort out the lettering for the patch but your skull is done...wing me your address and i'll send it.

[4nik8]

So, i'm thinkin' 'bout buyin' a trampoline...

…doin' a lil online comparison shopping

I see one that states that it is a 14 foot diameter, which then goes on to describe it a 14 X 14

This means that they do use "n X n" to describe circles, which FURTHER means that *I* was WRONG and WG was RIGHT!!!

Strange days indeed are upon us...

[Ninth Delegate]

I'm still shocked that Wargod drinks beer from a cup.  Has to be from a pint glass, or if you're feeling ye olde school retro; a tankard.

[4nik8]

Like I always say - never scan at a keg party!